Highly Selective and Scalable Molecular Fluoride Sensor for Naked-Eye Detection.

Fluoride is widely present in nature, and human exposure to it is generally regarded as inevitable. High levels of fluoride intake induce acute and chronic illnesses. To reduce potential harm to the general public, it is essential to create selective fluoride detectors capable of providing a colorimetric response for naked-eye detection without the need for sophisticated equipment. Here, we report a one-pot synthesis of four different diaminomaleonitrile-derived Schiff base sensors. The terephthalaldehyde adduct provided a strong color change visible to the naked eye at a F- concentration level as low as 2 ppm. From the evaluation against other anions, such as CN-, I-, Br-, Cl-, NO3-, PO43-, OAc-, and HSO4-, the molecular sensor displayed a visible color change exclusively upon exposure to fluoride, underscoring exceptional selectivity. As a key intermediate for understanding the mechanism, HF2- was confirmed by 19F nuclear magnetic resonance. Theoretical calculations suggested a deprotonation-triggered bathochromic shift brought about by the unique electronic structure of the sensor. Furthermore, the simple synthetic protocol from economically accessible materials allowed for the preparation of the compound on a large scale, rendering it a highly practical visual fluoride sensor.

Covalent Organic Framework Membranes and Water Treatment.

Covalent organic frameworks (COFs) are an emerging class of highly porous crystalline organic polymers comprised entirely of organic linkers connected by strong covalent bonds. Due to their excellent physicochemical properties (e.g., ordered structure, porosity, and stability), COFs are considered ideal materials for developing state-of-the-art separation membranes. In fact, significant advances have been made in the last six years regarding the fabrication and functionalization of COF membranes. In particular, COFs have been utilized to obtain thin-film, composite, and mixed matrix membranes that could achieve effective rejection (mostly above 80%) of organic dyes and model organic foulants (e.g., humic acid). COF-based membranes, especially those prepared by embedding into polyamide thin-films, obtained adequate rejection of salts in desalination applications. However, the claims of ordered structure and separation mechanisms remain unclear and debatable. In this perspective, we analyze critically the design and exploitation of COFs for membrane fabrication and their performance in water treatment applications. In addition, technological challenges associated with COF properties, fabrication methods, and treatment efficacy are highlighted to redirect future research efforts in realizing highly selective separation membranes for scale-up and industrial applications.

Clathrating CO2 in a Supramolecular Granatohedron Cage with Noncovalent CO2-NH3 Interactions and High CO2 Capture Efficiency under Ambient Conditions.

Organic amine (R-NH2) reagents as dominant chemical sorbents for CO2 capture in industrial processes suffer from high energy compensation for regeneration. Herein, we, for the first time, report the finding of Co(III) coordinating with NH3 molecules regulating the interaction between NH3 and CO2 to electrostatic interactions instead of a chemical reaction and achieve CO2 capture under near-ambient conditions. NH3 coordinating with Co(III) significantly reduces its alkalinity and reactivity with CO2 owing to its lone-pair electron donation during coordination. Under a simple protocol, CO2 induces the crystallization of CO2@[Co(NH3)6][HSO4][SO4] clathrate into a hydrogen-bonded granatohedron cage from a cobaltic hexammine sulfate aqueous solution under a CO2 pressure of 56 and 142 kPa at 275 and 298 K, respectively, with a CO2 uptake weight content of 11.7%. We reveal that CO2 interacts with cobaltous hexammine via supramolecular interactions rather than chemical bonding. The clathrate spontaneously separates from the solution as single crystals and readily releases CO2 under ambient conditions in water for cyclic utilization without further treatment. In such a rapid supramolecular capture process, molecular recognition ensures exclusive CO2 selectivity, and soluble clathrate enables the spontaneous CO2 release at a low energy penalty, exhibiting excellent practical potential in carbon capture.

Amine Chemistry of Porous CO2 Adsorbents.

ConspectusAs renewable energy and CO2 utilization technologies progress to make a more significant contribution to global emissions reduction, carbon capture remains a critical component of the mission. Current CO2 capture technologies involve operations at point sources such as fossil fuel-based power plants or source-agnostic like in direct air capture. Each strategy has its own advantages and limitations, but in common, they all employ sorption-based methods with the use of sorbents strongly adhering to CO2. Amine solutions are the most widely used absorbents for industrial operations due to the robust chemical bonds formed between amines and CO2 under both dry and humid conditions, rendering excellent selectivity. Such strong binding, however, causes problematic regeneration. In contrast, purely physisorptive porous materials with high surface areas allow for the confinement of CO2 inside narrow pores/channels and have a lower regeneration energy demand but with decreased selectivity and capacity. The most promising solution would then be the unification of both types of sorbents in one system, which could bring about a practical adsorption-desorption process. In other words, the development of porous solid materials with tunable amine content is necessary to leverage the high contact surface of porous sorbents with the added ability to manipulate amine incorporation toward lower CO2 binding strength.To answer the call to uncover the most feasible amine chemistry in carbon capture, our group has devoted intense effort to the study of amine-based CO2 adsorbents for the past decade. Oriented along practicality, we put forth a principle for the design of our materials to be produced in no more than three synthetic steps with economically viable starting materials. Porous organic polymers with amine functionalities of various substitutions, meaning primary, secondary, and tertiary amines, were synthesized and studied for CO2 adsorption. Direct synthesis proved to be feasibly applicable for secondary and tertiary amine-incorporated porous polymers whereas primary-amine-based sorbents would be conveniently obtained via postsynthetic modifications. Sorbents based on tertiary amines exhibit purely physical adsorption behavior if the nitrogen atoms are placed adjacent to aromatic cores due to the conjugation effect that reduces the electron density of the amine. However, when such conjugation is inhibited, chemisorptive activity is observed. Secondary amine adsorbents, in turn, express a higher binding strength than tertiary amine counterparts, but both types can merit a strengthened binding by the physical impregnation of small-molecule amines. Sorbents with primary-amine tethers can be obtained via postsynthetic transformation of precursor functionalities, and for them, chemical adsorption is mainly at work. We conclude that mixed-amine systems could exhibit unprecedented binding mechanisms, resulting in exceptionally specific interactions that would be useful for the development of highly selective sorbents for CO2.

Covalent Scrambling in Porous Polyarylthioethers through a Stepwise SN Ar for Tunable Bandgap and Porosity.

Porous poly(aryl thioether)s offer stability and electronic tunability by robust sulfur-aryl conjugated architecture, but synthetic access is hindered due to limited control over the nucleophilic nature of sulfides and the air sensitivity of aromatic thiols. Here, we report a simple, one-pot, inexpensive, regioselective synthesis of highly porous poly(aryl thioether)s through polycondensation of perfluoroaromatic compounds with sodium sulfide. The unprecedented temperature-dependent para-directing formation of thioether linkages leads to a stepwise transition of the polymer extension into a network, thereby allowing fine control of the porosity and optical band gaps. The obtained porous organic polymers with ultra-microporosity (<1 nm) and sulfur as the surface functional groups show size-dependent separation of organic micropollutants and selective removal of mercury ions from water. Our findings offer easy access to poly(aryl thioether)s with accessible sulfur functionalities and higher complexity, which will help in realizing advanced synthetic designs in applications such as adsorption, (photo)catalysis, and (opto)electronics.

Non-solvent post-modifications with volatile reagents for remarkably porous ketone functionalized polymers of intrinsic microporosity.

Chemical modifications of porous materials almost always result in loss of structural integrity, porosity, solubility, or stability. Previous attempts, so far, have not allowed any promising trend to unravel, perhaps because of the complexity of porous network frameworks. But the soluble porous polymers, the polymers of intrinsic microporosity, provide an excellent platform to develop a universal strategy for effective modification of functional groups for current demands in advanced applications. Here, we report complete transformation of PIM-1 nitriles into four previously inaccessible functional groups - ketones, alcohols, imines, and hydrazones - in a single step using volatile reagents and through a counter-intuitive non-solvent approach that enables surface area preservation. The modifications are simple, scalable, reproducible, and give record surface areas for modified PIM-1s despite at times having to pass up to two consecutive post-synthetic transformations. This unconventional dual-mode strategy offers valuable directions for chemical modification of porous materials.

Systematic Modulation of Thiol Functionalities in Inexpensive Porous Polymers for Effective Mercury Removal.

Through accumulation, mercury contamination in aquatic systems still poses serious health risks despite the strict regulations on drinking water and industrial discharge. One effective strategy against this is adsorptive removal, in which a suitably functionalized porous material is added to water treatment protocols. Thiol (SH) group-grafted structures perform commendably; however, insufficient attention is paid to the cost, scalability, and reusability or how the arrangement of sulfur atoms could affect the HgII binding strength. We used an inexpensive and scalable porous covalent organic polymer (COP-130) to systematically introduce thiol functional groups with precise chain lengths and sulfur content. Thiol-functionalized COP-130 demonstrates enhanced wettability and excellent HgII uptake of up to 936 mg g-1 , with fast kinetics and exceptionally high selectivity. These Hg adsorbents are easily regenerated with HCl and can be used at least six times without loss of capacity even after treatment with strong acid, a rare performance in the domain of Hg-removal research.

Bisphenol-based cyanide sensing: Selectivity, reversibility, facile synthesis, bilateral "OFF-ON" fluorescence, C2ν structural and conformational analysis.

A structurally characterized novel dual-pocketed tetra-conjugated bisphenol-based chromophore (fluorescence = 652 nm) was synthesized in gram scale in ~90% yield from its tetraaldehyde. Highly selective, naked-eye detection of CN- (DMSO/H2O) was confirmed by interferent testing. A detection limit of 0.38 µM, within the permissible limit of CN- concentration in drinking water was achieved as mandated by WHO. The "reversibility" study shows potential applicability and reusability of Sen. Moreover, cost-effective and on-site interfaces, application tools such as fabricated cotton swabs, plastic Petri dishes, and filter papers further demonstrated the specific selectivity of Sen for the toxic CN-. In addition, an easily available and handy smartphone-assisted "Color Picker" app was utilized to help estimate the concentration of CN- ion present. A dual phenol deprotonation mechanism is active and supported by 1H NMR spectroscopic data and DFT calculation results.

Rate Dependence on Inductive and Resonance Effects for the Organocatalyzed Enantioselective Conjugate Addition of Alkenyl and Alkynyl Boronic Acids to ß-Indolyl Enones and ß-Pyrrolyl Enones.

Two key factors bear on reaction rates for the conjugate addition of alkenyl boronic acids to heteroaryl-appended enones: the proximity of inductively electron-withdrawing heteroatoms to the site of bond formation and the resonance contribution of available heteroatom lone pairs to stabilize the developing positive charge at the enone ß-position. For the former, the closer the heteroatom is to the enone ß-carbon, the faster the reaction. For the latter, greater resonance stabilization of the benzylic cationic charge accelerates the reaction. Thus, reaction rates are increased by the closer proximity of inductive electron-withdrawing elements, but if resonance effects are involved, then increased rates are observed with electron-donating ability. Evidence for these trends in isomeric substrates is presented, and the application of these insights has allowed for reaction conditions that provide improved reactivity with previously problematic substrates.

Covalent Amine Tethering on Ketone Modified Porous Organic Polymers for Enhanced CO2 Capture.

Effective removal of excess greenhouse gas CO2 necessitates new adsorbents that can overcome the shortcomings of the current capture methods. To achieve that, porous materials are often modified post-synthetically with reactive amine functionalities but suffer from significant surface area losses. Herein, we report a successful amine post-functionalization of a highly porous covalent organic polymer, COP-130, without losing much porosity. By varying the amine substituents, we recorded a remarkable increase in CO2 uptake and selectivity. Ketone functionality, a rarely accessible functional group for porous polymers, was inserted prior to amination and led to covalent tethering of amines. Interestingly, aminated polymers demonstrated relatively low heats of adsorption, which is useful for the rapid recyclability of materials, due to the formation of suspected intramolecular hydrogen bonding.

Quantifying the nitrogen effect on CO2 capture using isoporous network polymers.

The impact of nitrogen atoms on CO2 binding was evaluated for two isostructural porous bisimidazole-linked polymers (BILPs), which serendipitously had identical surface areas and pore size distributions, a very rare observation. The two structures differ only in the core of the trialdehyde component, the nitrogen atom (BILP-19) versus benzene ring (BILP-5). Such a slight difference, however, has brought about a stronger CO2 capture capacity of BILP-19 and hence increased CO2/N2 separation capability.

Relay Catalysis To Synthesize ß-Substituted Enones: Organocatalytic Substitution of Vinylogous Esters and Amides with Organoboronates.

Organocatalysis was shown to facilitate conjugate additions to vinylogous esters and amides for the first time. Subsequent elimination of a ß-alcohol or amine provided π-conjugated ß-substituted enones. Remarkably, nucleophile addition to the electron-rich vinylogous substrates is more rapid than classical enones, forming monosubstituted products. A doubly organocatalytic (organic diol and methyl aniline) conjugate addition synthesized the products directly from alkynyl ketones. Both of these catalytic transformations are orthogonal to transition metal catalysis, allowing for good yields, easily accessible or commercially available reagents, high selectivity, reagent recovery and recyclability, facile scalability, and exceptional functional group tolerance.

Gold recovery using porphyrin-based polymer from electronic wastes: Gold desorption and adsorbent regeneration.

Electronic wastes containing precious metals have great potential as a sustainable source of such metals. Separation and refining, however, remain complicated, and none of the existing technologies have yet experienced commercialization. A novel porphyrin-based porous polymer, named COP-180, was recently introduced as a powerful adsorbent option, especially for gold, and in this study, aspects of desorption and recovery of adsorbed gold and regeneration of the polymer were investigated. A hydrometallurgical method using non-cyanide leaching agents was developed, and an acid thiourea-based solution was found to be particularly suited for the method based on COP-180 with gold desorption efficiency of 97%. Fourier-transform infrared spectroscopy spectra demonstrated the unaffected structure of COP-180 after desorption, implying the potential of its reuse. This high desorption efficiency was achieved even without typical aiding agents by means of a formamidine disulfide-mediated route that prevented thiourea consumption, which is considered a major drawback of the otherwise promising reagent. Using this method, the polymer was able to maintain more than 94% desorption efficiency after five times of regeneration. The results suggest that acid thiourea can offer a workable means of recovering gold particularly from the excellent gold-adsorbent of COP-180, and that repeated regeneration is also possible.

Inversion of Dispersion: Colloidal Stability of Calixarene-Modified Metal-Organic Framework Nanoparticles in Nonpolar Media.

Making metal-organic frameworks (MOFs) that are stabilized in nonpolar media is not as straightforward as making their inorganic nanoparticle counterparts, since surfactants penetrate through the porous structures or dissolve the secondary building units (SBUs) through ligand-exchange linker modulator mechanisms. Herein, we report that calixarenes stabilize UIO-66 nanoparticles effectively by remaining outside the grains through size exclusion, without pores becoming blocked, all the while providing amphiphilicity that permits the formation of stable colloidal dispersions with much narrower size distributions. Using the UIO-66 dispersed solutions, we show that smooth films from an otherwise immiscible polystyrene can be made feasibly.

Chemical constituents of Geum urbanum L. roots.

A new dehydrodigallic acid derivative (1), along with 19 known compounds, including 6 phenolic derivatives, 2 steroids and 11 triterpenoids were isolated from the ethanol extract of the root of Geum urbanum. Herein, there is the first report of steroid and triterpene in Geum urbanum. The purified metabolites were characterised by NMR spectroscopic and mass spectrometric analyses. The identification of the known compounds (2-20) was based on the comparison of their NMR spectroscopic features with previously published data. The structural characteristics of compound 1 were elucidated by comprehensive 1D and 2D NMR spectroscopic methods and acid hydrolysis.

Brønsted Acid Catalyzed Homoconjugate Addition of Organotrifluoroborates to Arylated Cyclopropyl Ketones.

A novel and practical homoconjugate addition of alkenyl, alkynyl, heteroaryl, and aryl trifluoroborates to arylated cyclopropyl ketones to synthesize γ,γ-disubstituted ketones is reported. A preliminary mechanistic proposal involving ketone protonation, an intermediary carbocation, and intermolecular nucleophile addition has been made based on control studies.

Organocatalyzed Asymmetric Conjugate Addition of Heteroaryl and Aryl Trifluoroborates: a Synthetic Strategy for Discoipyrrole†D.

Bis-heteroaryl or bis-aryl stereocenters were formed by an organocatalytic enantioselective conjugate addition using the respective trifluoroborate salts as nucleophiles. Control studies suggested that fluoride dissociation is necessary in the anhydrous conditions. This strategy is applicable to the synthesis of discoipyrrole D, an inhibitor of BR5 fibroblast migration.

A general method for the enantioselective synthesis of α-chiral heterocycles.

The enantioselective formation of stereocenters proximal to unprotected heterocycles has been accomplished. Thus, vinyl boronic acids are added to heterocycle-appended enones via a modified-BINOL catalyst. Catalyst design was key to enable a general reaction. High yields and useful er's are observed for a host of common heteroaryls.